Amprobe ACD-41PQ Power Quality Clamp-On Meter

Page Navigation >

Clamp-On Meter Index >Model ACD-41PQ

Amprobe Clamp-On Meter Heading

ACD-41PQ 1000 Amp Power Quality Clamp-on

The ACD-41PQ provides a simple and effective way to verify if the electrical system is affected by harmonics. Get complete Power analysis with the ACD-41PQ and increased measuring efficiency with an optional PC interface kit.

ACD-41PQ 1000 Amp Power Quality Clamp-on

Features

TRMS sensing.
Total Harmonics Distortion THD, AC/DC Voltage up to 600V, AC Current up to 1000A.
Peak and Data Hold.
Temperature
Resistance Measurements.
Frequency Measurements.
Active (W), Reactive (VAR) and Apparent (VA) Power with Power Factor.
Optional PC interface capacity (RS-232 KIT2).
Audible continuity.
Auto Power Off.
Automatic Polarity.
Low Battery Indication.
Measurement Category CAT III 600V (AC/DC)
Voltage overload protection for all functions up to 600V AC/DC.
Large easy to read LCD display with backlight.
Accommodates conductors up to 45mm (1.77") in diameter.

Safety Conformity

Specifications

True RMS	True RMS sensing
AC Voltage	600.0V
AC Voltage Basic Accuracy	±(0.5% of reading + 5 digits) at 50/60Hz
AC Current	40.0A, 400.0A, 1000A
AC Current Basic Accuracy	±(1.0% of reading + 5 digits) at 50/60Hz

DC Voltage	600.0V
DC Voltage Basic Accuracy	±(0.5% of reading + 5 digits)

Resistance	999.9 Ohms
Resistance Basic Accuracy	±(1.0% of reading + 6 digits)
Frequency	5.00Hz to 500Hz
Frequency Basis Accuracy	±(0.5% of reading + 4 digits)

THD-F	0.0% to 99.9%
THD-F Basic Accuracy	1.5% of Rdg = 6 digits at Fund Frequency

Active Power (W)	0 to 600.0 kW
Active Power (W) Basic Accuracy	±(2.0% of rdg + 6 digits) at Harmonics Fund to 10th and PF>0.7
Reactive Power (VAR)	0 to 600.0 kVAR
Reactive Power (VAR) Basic Accuracy	±(2.0% of rdg + 6 digits) at Harmonics Fund to 10th and PF>0.7
Apparent Power (VA)	0 to 600.0 kVA
Apparent Power (VA) Basic Accuracy	±(2.0% of rdg + 6 digits) at Harmonics Fund to 10th

Power Factor	0.10 to 0.99
Power Factor Basic Accuracy	±3 digits at Harmonics Fund to 21th

Temperature	-50°C to 300°C (-58°F to 572°F)
Temperature Basic Accuracy	±(2.0% of Rdg + 3°C), ±(2.0% of Rdg + 6°F)

Sampling Rate	1 per second (Power Function)
	4 per second (Voltage, ACA clamp-on, Hz and Temp Functions)
Polarity	Automatic
Low Battery	Below 2.4V approx.
Transient Protection	6.5kV (1.2/50μs surge)
Pollution	Degree 2
E.M.C.	Meets EN61326 (1997, 1998/A1), EN61000-4-2 (1995), and
	EN61000-4-3 (1996) an RF field of 3V/m:
	Specified Accuracy + 45 digits
	performance above 3V/m is not specified

General Specifications

Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C, <80% R.H. (battery removed)
Power Supply	Standard 1.5V 'AAA' size (NEDA 24A or IEC LR03) battery x 2
Power Consumption	10mA typical (Voltage, ACA, Hz and Power Functions)
	4mA typical (HM and Temperature functions)
Size	224mm (L) x 78mm (W) x 40mm (D)
Weight	224g approx

Included Accessories
Users Manual, Batteries, Thermocouple, Carrying Case and Test Leads

Optional Accessory
	RS-232 KIT2 Data recording System