|
This meter is the essential
shirt pocketsize meter. Only 3/8" thick and less than 3 oz in
weight, this meter offers full functionality with ac and dc voltage
to 450 V, resistance to 6 Megohm, capacitance to100 μF, frequency to
30 kHz and continuity w/beeper. It also offers VolTect,™ a built-in,
non-contact voltage detector for ac voltages.
Another key feature is AutoTect,™which
automatically selects ac voltage, dc voltage or resistance
measurement based on the test point to which the leads are
connected. Fully autoranging, this meter offers seven different
measurement functions plus features that are usually found in much
more expensive and larger meters. The digital display is oversized
with large digits and unit icons in the display. In spite of its
size, this meter is fully safety rated to CAT III300 V, CAT II 450 V
and is UL listed. Includes a silicone protective holster, attached
test leads, battery and manual.
|
 |
Pocket size Digital Multimeter with AutoTect™
Features
- AutoTect™ knows if it is measuring ac volts, dc volts or
resistance.
- The AutoTect™ feature has lower input impedance which zeros
out ghost voltages.
- Measures capacitance, frequency, continuity with beeper.
- VolTect,™ a built-in, non-contact voltage detector.
- Large oversize digital display.
- Protective silicon holster included, attached test leads,
battery and manual.
- Overload protection 450 V dc and V ac rms.
- Sensing Average sensing.
- Display and update rate 3-5/6 digits 6000 counts; Updates 5
per second nominal.
- Automatic Power Off (APO) timing Idle for 3 minutes.
- Low battery Below approx. 2.4 V.
- Power supply 3 V standard button battery x 1.
- One-year warranty.
 |
|
| Specifications |
| |
|
|
RF Field |
RF field @ 3V/m
(Specified accuracy +45 digits Capacitance not |
|
|
specified) |
|
|
|
|
DC Voltage Ranges |
6.000V, 60.00V,
450.0V |
|
DC Voltage Accuracy |
±(0.5% of Rdg + 3 digits) for 6V range |
| |
±(1.0% of Rdg + 5 digits) for 60V ranges |
| |
±(1.2% of Rdg + 5 digits) for 450V range |
|
NMRR |
>30dB @ 50/60Hz |
|
CMRR |
>100dB @ DC, 50/60Hz; Rs=1kΩ |
|
Input Impedance |
AutoTect™ Lo-ZV DC: 160kΩ, 160pF nominal |
|
V DC AutoTec™
Threshold |
>+1.2V DC or <-0.6V
DC nominal |
| |
|
|
AC Voltage Ranges |
6.000V, 60.00V,
450.0V |
|
AC Voltage Accuracy (50/60Hz) |
±(1.5% of Rdg + 5 digits) for 6V, 60V, 450.0V ranges |
|
CMRR |
>60dB @ DC to 60Hz, Rs=1kΩ |
|
Input Impedance |
AutoTect™ Lo-ZV DC: 160kΩ, 160pF nominal |
|
V AC AutoTec™
Threshold |
>+1.5V (50/60Hz)
nominal |
| |
|
|
Capacitance Ranges |
100nF, 1000nF, 10.0μF,
100.0μF |
|
Capacitance Accuracy |
±(3.5% of Rdg + 6 digits4) for 100.0μF1,3 |
Note 1. Additional 50nF range accuracy not specified.
Note 2. Accuracies with film capacitor or better.
Note 3. Updates >1 minute on large values.
Note 4. Specified with battery voltage above 2.8V (half full
battery). Accuracy decreases gradually to 12% at low battery warning
voltage of approx. 2.4V. |
| |
|
|
Resistance Ranges |
6.000kΩ1,
60.00kΩ, 600.0kΩ,
6.000MΩ |
|
Accuracy |
±(1.2% of Rdg + 6 digits2) for 6.000kΩ
range |
| |
±(1.0% of Rdg + 4 digits) for 60.00kΩ,
600.0kΩ ranges |
| |
±(2.0% of Rdg + 4 digits) for 6.000MΩ
range |
|
Open Circuit Voltage |
0.4V DC typical |
Note 1. AutoTectTM is for 6.000kΩ to 6.000MΩ
ranges.
Note 2. Add 40 digits to specified accuracy while reading is below
20% range. |
| |
|
|
Frequency Ranges |
100Hz, 1kHz, 10kHz |
|
Frequency Accuracy |
±(0.5% of Rdg + 4 digits) <20V Sine-RMS |
|
Sensitivity (Sine-rms) |
Hz in Auto-VΩ
position: >3V |
|
|
|
|
VoltTectTM |
|
|
|
|
|
Typical Voltage |
Bar Graph
Indication |
|
15V to 55V |
- |
|
30V to 85V |
-- |
|
55V to 145V |
--- |
|
85V to 190V |
---- |
|
above 120V |
----- |
|
Indication |
Bargraph segments and
audible beep tones proportional to field |
|
|
strength |
|
Detection
Frequency |
50/60Hz |
|
Detection Antenna |
Top left corner of
the meter |
| |
|
|
Continuity Tester Open Circuit Voltage |
0.4V DC typical |
|
Audible Threshold |
175Ω
±125Ω |
| |
|
| General Specifications |
| |
|
|
Display and Update Rate |
3-5/6 digits 6000-counts; Updates
5 per second
nominal |
|
Sensing |
Average sensing |
|
Operating Temperature |
0°C to 40°C |
|
Storage Temperature |
-20°C to 60°C,
<80% R.H. (with battery removed) |
|
Overload Protection |
450V DC and 450V AC rms |
|
Low Battery |
Below 2.4V |
|
Power Supply |
One 3V button battery (IEC-CR2032; ANSI-NEDA-5004LC) |
|
Power Consumption |
2µA typical |
|
Dimensions
|
113mm (L) x 53mm (W) x 10.2mm (D)
4.4" (L) x 2.1" (W) x 0.4" (D) |
|
Weight |
78g (3oz) |
| |
|
|
Included Accessories |
|
Protective Silicon holster
included, attached Test leads and Battery
(installed), user manual |
|
|
|
