|
|
|
|
| |
|
VPV-10 Voltage and Continuity |
|
|
| |
|
A user-friendly troubleshooting
tester
Designed to meet most voltage and continuity applications.
The tester automatically turns on when the probes are placed
across a complete circuit. The tester selects continuity or dc or ac
voltage mode based on the resistance or voltage between the probes.
The tester automatically turns off when you remove the probes from
the complete circuit. |
|
 |
Features
- Extremely easy to use, no buttons, no setups.
- Automatically turns ON and OFF.
- Automatically selects AC Voltage, DC Voltage or Continuity.
- Indicates seven levels of AC or DC Voltage.
- Polarity Indication.
- Continuity buzzer.
- Visual continuity indication (LED).
- Safety CAT-III 600V.
 |
|
| Specifications |
| |
|
Function |
Range |
Accuracy |
|
AC Voltage (50/60Hz) |
24V, 120V, 208V, 240V, 277V, 480V, 600V |
-30% to 0% of reading |
|
DC Voltage |
6V, 12V, 24V, 36V, 48V, 110V, 220V |
-30% to 0% of reading |
|
| |
| |
| General Specifications |
| |
|
Continuity Test |
Audible threshold 0 to 85kΩ,
Continuity beeper 2kHz |
|
Maximum Voltage |
600V Overvoltage Category III (Between
any Terminal and Earth Ground) |
|
Input Impedance |
1MΩ |
|
Operating Temperature |
5°C to 40°C
|
|
Storage Temperature |
-30°C to + 60°C |
|
Relative Humidity |
80% for temperature up to 31°C
decreasing linearly to 50% R.H. at 40°C |
|
Power Supply |
Two 'AA' batteries type NEDA 15F or IEC
R6 |
|
Battery Life |
350-hours if types NEDA 15F or IEC R6
are used |
|
Safety |
Complies with EN 61010-1:1993 for use in
overvoltage CAT III environments. |
|
Pollution Degree |
2 |
|
EMC Regulations |
EN 50081-1, EN 50082-1 |
|
| |
| |
|
Included Accessories |
|
Instrument comes complete with
carrying case |
|
| |
| |
| |
|
