| |
|
|
|
|
|
|
|
Models 190B and 190C
Medical ScopeMeter®
-
Specifications |
|
|
| |
| |
|
For instruments that have the MS190 Software Extension installed, the full
specification for the
Fluke ScopeMeter 190 Series applies, with the additions as specified below. |
| |
|
Oscilloscope Mode |
|
Display
and acquisition |
Channels
displayed: input A, input B, dual channel.
Display modes: smart averaging, normal averaging, selectable
persistence, invert, replay.
Smart averaging displays averaged curve; incidental waveforms that differ
too much from the average curve are displayed but do not contribute to the
averaged curve.
Averaging factor: selectable: 2x, 4x, 8x, 64x or off.
Selectable persistence decay time: short, medium, infinite or off;
can be used with dots only display or with dot join mode. |
|
Trigger
and delay - Video Triggering |
Interlaced video: NTSC, PAL, PALplus, SECAM. Selects field 1, field 2,
lines or on user selected line from a frame.
Non-interlaced video: for line counts up to 2800 lines per frame
and video scan rates up to 65 kHz; triggers on fields, on lines or on
user-selected line. |
|
Cursor
measurements |
Dual
vertical lines: time between cursors, voltage between markers, 1/T (in
Hz), mVs, mAs |
|
Zoom |
Horizontal zoom: Up to 8x Vertical zoom: using position control (offset) and vertical
sensitivity. |
|
Offset
range |
Max.
offset for viewing positive-going signals: 16 divisions for input
sensitivity settings 5…50 mV/div (50…500 mV/div. when using 10:1 probe or
TA190-50R); 8 divisions for all other vertical sensitivity settings.
Max. offset for viewing negative-going signals: 8 divisions for
all vertical sensitivity settings. |
|
|
