Leda Electronics Logo. Western  Australia's largest distributor of Test Instruments Leda Electronics Showing The Way

 
 
Fluke Test Instruments Logo

Fluke Process Calibration Instruments

 
Model 525A Temperature/Pressure Calibrator  - Specifications  
 
 
Model 525A Source and Measure Specifications for one year
Specifications One Year (Source)
Voltage (1 ma Max Load) 0 to 100 V
Best one year specification: 30 ppm of setting
Current (10V Compliance) 0 - 100 mA
Best one year specification: 100 ppm of setting
Resistance 5 - 4,000 Ohms
Best one year specification: 0.03 Ohms
Thermocouple (B,C,E,J,K,L,N,R,S,T,U) Standard thermocouple ranges
Best one year specification: 0.14° C (type E)
RTD*
(pt 100, 200, 500, 1000 ;(0.00385 and 0.00392
TCR) Ni 120, Cu 10,
YSI 400 thermistor
-200° C to 800° C
Best one year specification: 0.07° C (pt 100)
 
 
Specifications One Year (Measure)  
SPRT 25.5 Ohm - 200° C to 660° C
Best one year specification: 0.02 C
Resistance 5 - 4,000 Ohms
Best one year specification: 0.03 Ohms
Thermocouple (B, C, E, J, K, L, N, R, S, T, U) Standard thermocouple ranges
Best one year specification: 0.14° C (type E)
RTD* (pt 100, 200, 500, 1000) ;(0.00385 and 0.00392 TCR)   -200° C to 800° C
Best one year specification: 0.07° C (pt 100)
Ni 120 - 80° C to 100° C
Best one year specification: 0.01° C
Cu 10 - 100° C to 260° C
Best one year specification: 0.06° C
YSI 400 thermistor 15° C to 50° C
Best one year specification: 0.007° C
Pressure See Fluke 700 Series pressure modules specifications


*
In addition to listed RTDs , six custom RTD curves may be programmed for source and measure functions using Calendar-Van Dusen constants.

 
 
Model 525A General Specifications
Settling Time Less than 5 seconds
Temperature Performance Operating: 0° C to 50° C;
Calibration (tcal): 15° C to 35° C ;
Storage: - 20° C to 70° C
Interfaces Temperature coefficient for temperatures outside tcal + 5° C is 10 % of the 90 day specification per °C
RH Operating: < 80% to 30° C, < 70 % to 40° C, 40 % to 50° C;
Storage: <95%, non-condensing
Analog Low Isolation 20V
EMC IEC 61326- 1/1997 (EMC)
Weight / Dimensions 9 lbs (4 kg) ; H 5.25" x W 12.5" x D 18.6" (H 13.1 cm x W 31.3 cm x D 47.3 cm)
Line Power Line voltage (selectable): 100/120 or 220/240V;
Line frequency: 47 Hz to 63 Hz; consumption < 10 VA

 


 

Home | Amprobe | CIE | EuroSMC | Fluke | Kyoritsu-Kew |Megger | Reed | Yokogawa | Site Map | Search

Leda Electronics Pty. Ltd.
A.C.N. 078 681 562           A.B.N. 83 078 681 562
P.O. Box 1733 Malaga, LPO WA 6944
                                                      Unit 5, 31 Century Road, Malaga, Western Australia 6090                                                            
Phone: 61 8 9248 6688    Fax: 61 8 9248 6227

information@ledaelectronics.com.au

          Copyright © 2000 - 2011                                                                Last Modified: Thursday, 15 September 2011