Whether you are calibrating instruments, troubleshooting a problem ,or running planned maintenance, the multifunction Fluke 743 Documenting Process Calibrators help get the job done faster. It does so many different tasks, so quickly and so well, it's the only process calibrator you need to carry.
 

DPC/TRACK software for instrumentation management
Manage your instruments and your calibration data with this easy-to-use instrumentation management database. Create calibration procedures, lists, and instructions on your PC and download them to the 743B. Upload your calibration data back to your PC. Print reports or export data in standard ASCII format.

The scheduling of calibrations, creation of procedures and documentation of your calibration results can also be facilitated by a number of other instrumentation management software packages:

	Fluke DPC/TRACK
	Beamex QM6 Quality Manager Calibration Software
	Cornerstone Cal Station and Base Station
	Honeywell Loveland DocuMint
	Fisher Rosemount Asset Management Solutions
	Blue Mountain Quality Resources

DPC/TRACK is a trademark of Fluke Corporation.
QM6 is a trademark of Beamex, Inc.
Cornerstone is a trademark of Applied System Technologies.
InstruMint and DocuMint are trademarks of Honeywell.

Covers virtually any pressure application including gage, differential, dual (compound), absolute, and vacuum.
 

	Display pressure readings in any of 10 different pressure units you specify in the calibrator setup.
	Rugged urethane molded cases protect the modules from rough handling and harsh conditions.
	Features internal temperature compensation from 0º to 50º C for full accuracy performance.
	Includes NIST-traceable calibration certificate.
	Modules can be calibrated locally, helping to control costs.

A family of twenty eight optional pressure modules provides pressure calibration and measurement capabilities. Twenty-eight modules are available, with basic accuracy specs to 0.05%. Ranges start at 0-10"H₂0 (0-2.5kPa) and go to 0-10,000 psi (0-70,000 kPa).

Allow you to quickly set up powerful, automated calibration procedures for linear transmitters, DP flow transmitters, and one- and two-point limit switches. Simply select the appropriate measure and/or source functions and fill out the procedure template. The 740 Series does the rest. It quickly performs the test, calculates the errors, and displays the final results, highlighting out of tolerance points.

Enable you to map one unit to another, such as mV to ºC or ºF. Allows you to use the Fluke 740 Series with millivolt output accessories such as the Fluke 80T-IR Temperature Probe, and to document tests using non-supported units such as parts per million or revolutions per minute.

Enables technicians to record calibration results that were sourced and/or measured by other devices such as panel meters or readout-only devices.

Limit switch calibration

Procedures perform fast, automated calibration of one and two-point limit switches for voltage, current, temperature, and pressure.

Routines use a square root function to directly calibrate DP flow instruments.

Multifunctional
Calibrate temperature, pressure, voltage, current, resistance, and frequency. Since it both measures and sources, you can troubleshoot and calibrate all with one rugged tool.

Powerful, yet easy to use
The easy-to-follow menu-driven display guides you through any task. Get up to speed in minutes, not days. Programmable calibration routines enable you to create and run automated as-found/as-left procedures to ensure fast, consistent, calibrations.

Records and documents results
To support your ISO-9000 or regulatory standards the Fluke 743B capture your calibration results, eliminating the need to juggle a pen and pad in the field. The RS-232 interface lets you transfer the results to a PC, thus saving the time of having to manually transcribe them when you return to the shop.

Rugged and reliable
Count on Fluke's rugged design to deliver top accuracy and reliability in harsh environments. Overmolded urethane case stands up to rough handling in industrial environments.

Soft keys
Provide one-touch access to enhanced functions such as task lists, automated procedures, scaling, min/max, stepping and ramping, and review memory.

Three operating modes
Measure, Source, or simultaneous Measure/Source, - enable technicians to troubleshoot, calibrate, or maintain instrumentation with just one tool.

Built-in algebraic calculator
With four functions-plus square root-stores, recalls, and performs calculations required for setting up instruments or evaluating data in the field. Use it to set the source function to a calculated value. There's no need to carry a pencil and paper or a separate calculator.