Leda Electronics Logo. Western Australia's largest distributor of Test Instruments Leda Electronics Showing The Way

 
 
Fluke Test Instruments Logo

Fluke Process Calibration Instruments
 
789 ProcessMeter™ - Features  
 
 
Fluke Model 789 ProcessMeter™ Features Fluke Model 789 ProcessMeter™ Features
 
bullet 24 V Loop power supply.
bullet Very large dual display.
bullet Enhanced backlight with 2 brightness settings.
bullet 1200 Ohm drive capability on mA source.
bullet HART mode setting with loop power and a built-in 250 ohm resistor.
bullet 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check.
bullet Externally accessible fuses for easy replacement.
bullet Meets 1000 Volt EN61010-1 CAT III standards.

 

Fluke 789 features that are also included in the Fluke 787
 
bullet Precision 1000 V, 440 mA True-RMS digital Multimeter.
bullet 0.1% dc voltage accuracy.
bullet 0.05% dc current accuracy.
bullet Frequency measurement to 20 kHz.
bullet Min/Max/Average/Hold/Relative modes.
bullet Diode Test and Continuity Beeper.
bullet Simultaneous mA and % of scale readout.
bullet 20 mA DC current source / loop calibrator / simulator.
bullet Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp.
bullet Externally accessible battery for easy battery changes.

 

Home | Amprobe | CIE | EuroSMC | Fluke | Kyoritsu-Kew |Megger | Reed | Yokogawa | Site Map | Search

Leda Electronics Pty. Ltd.
A.C.N. 078 681 562           A.B.N. 83 078 681 562
P.O. Box 1733 Malaga, LPO WA 6944
                                                      Unit 5, 31 Century Road, Malaga, Western Australia 6090                                                            
Phone: 61 8 9248 6688    Fax: 61 8 9248 6227

 information@ledaelectronics.com.au

          Copyright © 2000 - 2011                                                                Last Modified: Thursday, 15 September 2011