Leda Electronics Logo. Western Australia's largest distributor of Test Instruments Leda Electronics Showing The Way

 
 
Fluke Test Instruments Logo

Fluke Accessories

 
i1010 AC/DC Current Probe  
 

Fluke Model i1010 AC/DC Current Probe

 Battery-powered Hall-effect clamp-on probe measures ac current to 600A, dc current to 1000A. Output is 1 mV per amp dc or ac.
 Maximum conductor size: one 1.18" (30 mm) or two 0.98" (25 mm).

Accuracy:
 
bullet ±(2%+0.5A), 1A to 1000A, 45Hz to 400Hz.
bullet ±(3+0.5A), 1A to 600A, 400Hz to 2kHz sinewave.

 
 
Model i1010 AC/DC Current Clamp Specifications
Measurement Type Hall sensor
Nominal Current Range 600 Amps AC
1000 Amps DC
Continuous Current Range 1 Amp to 600 Amps AC
1 Amp to 1000 Amps DC
Maximum Non-Destructive Current 1000 Amps
Lowest Measurable Current 0.5 Amp
Basic Accuracy 2% + 0.5 Amp (% of reading + floor-spec)
Useable Frequency DC to 10kHz
Output Level(s) 1mV/Amp
Zero Error Adjustment Yes
Safety CAT III, 600 Volts
Maximum Voltage 600 Volts AC
 
 
Model i1010 AC/DC Current Clamp General Specifications
Warranty One year
Maximum Conductor Diameter
 		 30mm
2 x 25mm
Output Cable Length 1.6 meters
Shrouded Banana Plugs Yes
Battery Life 9 Volt, 60-hours
 

 

Home | Amprobe | CIE | EuroSMC | Fluke | Kyoritsu-Kew |Megger | Reed | Yokogawa | Site Map | Search

Leda Electronics Pty. Ltd.
A.C.N. 078 681 562           A.B.N. 83 078 681 562
P.O. Box 1733 Malaga, LPO WA 6944
                                                      Unit 5, 31 Century Road, Malaga, Western Australia 6090                                                            
Phone: 61 8 9248 6688    Fax: 61 8 9248 6227

 information@ledaelectronics.com.au

          Copyright © 2000 - 2011                                                                Last Modified: Thursday, 15 September 2011