i200s Current Clamp
for use with DMM's, Oscilloscopes,
ScopeMeters and Power Quality Analyzers
Small
sized, convenient-to-use current clamp
The i200s is a dual range 20A and 200A ac current clamp with voltage output
via a safety insulated BNC connector. A dual banana to BNC adapter is supplied
to allow the i200s to be connected to multimeters with banana inputs.
Measuring range: 0.1 to 24A and 0.5 to 240A.
The output signal is 100 mV/A in the 20A range and 10 mV/A in the 200A
range.
Includes BNC connector making it suitable for use with any oscilloscope,
power analyzer or ScopeMeter" test tool having a compatible BNC input
connector.
Dual banana to BNC adapter is included for use with DMMs.
Maximum current 240A ac.
40 Hz to 10 kHz frequency response.
Jaw opening 21 mm.
Maximum conductor size 20 mm dia. or busbar 20 x 5 mm
EN61010, CAT III 600V
One year warranty.
Nominal Current Range
20 Amp
200 Amp
Continuous Current
Range
0.1 Amp to 24 Amps
0.5 Amp to 200 Amps
Maximum Non-Destructive
Current
240 Amps
Lowest Measurable
Current
0.1 Amp
Basic Accuracy
1.5% +0.5 Amp (48Hz to
65Hz)
(% of reading + floor-spec)
