| MicroScanner Pro Dimensions
|
5.5"
x 3.25" x 1" (139.7 x 82.5 x 25.4 mm) |
| Battery |
9-volt
alkaline battery; low battery indication |
| Display |
Custom
LCD, 1.75" x .85" |
| Applications |
Shielded (STP) and UTP cable; 75 or
50 Ohm Coaxial cable; 10 Base-T or 10/100 Base-T networks |
| Main tester interface
|
Modular 9 connector for length,
10/100 link identification, wire map, office identifier, toner; loopback
interface: module 8 connector used for patch cable wiremap |
| Length measurement |
Measures length on all 4 pairs and
displays in feet or meters; max length 1500 ft (457 m) |
| Length calibration |
User selectable NVP, NVP calculation
based on known cable length (min. length 50 ft (15 m) and max. length 1500
ft (457 m) |
| Wiremap and Office/Identifier
|
Faults detected: Opens, Shorts,
Reversed pairs, Swapped pairs, and Split pairs, distance maximum length:
656 ft (200/m) |
| Office Identifier |
6 passive test plugs attached to far
end (identified as #1-3 and #5-7); distance maximum length 656 ft (200 mm) |
| Toner frequency |
User may select 1 of 4 predefined tone
sequences |
| Toner interface |
Main Mod8 port for tone generation
on all 4 pairs. Ground jack provided for grounding MicroScanner Pro during
trace operations. |
| High voltage input/protection
|
The test interface withstands input
hazard conditions that arise from normal telephone interfaces (48 VDC at
less than 80 mA) or 24 VAC power used to power many telephone key sets
|
| Wiremap Adapter |
Dimensions: 2.25" x .5 x .625"
|
| Coax Adapters |
Dimensions: 3" x .63" x .58"
|
