| |
|
312FC and 314FC Magnetic Surface Thermometers |
|
 |
Magnetic
surface thermometers
Features
- Dual magnetic mount surface thermometers specially
designed to be used on horizontal or ferrous
non-horizontal surfaces.
- Features two alnico magnets that act as the
thermometer's base and hold it in place on ferrous
surfaces.
- Bimetallic sensor is a specially processed alloy that
is preconditioned and protested for permanent calibration
and maximum stability.
- Sensor is located in a draft shield and is in virtual
thermal contact with the surface to be measured.
- Relatively quick response time.
- Reaches sensing equilibrium (stability) within three
minutes.
- Designed for applications such as: hot plates,
griddles, die-cast dies, foundry core boxes, annealing
ovens, weld preheats, motors, generators, engines,
bearings, boilers, tanks, and drums.
|
|
|
Specifications |
|
Measurement Range |
Specification |
Temperature Range
|
Model 312FC: -20°C to 120°C (0°F to
250°F) Divisions 1°C/2°F |
|
Model 314FC: 10°C to 400°C (50°F to
750°F) Divisions 5°C/10°F |
|
Accuracy |
±2% of full scale |
|
Time Constant |
From 0.06sec to 1 min (depending on range) |
|
| |
| |
|
General Specifications |
|
Dimensions |
2" dia x 1/" deep (51mm dia x 13mm deep) |
|
Weight |
43g (1-1/2 oz) |
|
| |
| |
|
Ordering Information |
|
Model 312FC |
Magnetic surface thermometer, -20°C to
120°C (0°F to 250°F) |
|
Model 314FC |
Magnetic surface thermometer, 10°C to
400°C (50°F to 750°F) |
|
|
