| |
|
KEW6310-01 Power Quality Analyzer |
|
|
500
Amp Power Quality Analyzer
Features
- Measurements include: voltage, current, frequency,
active power, apparent power, reactive power, active
energy, reactive energy, active energy, power factor,
power quality, i.e. sags and swells, unbalanced, flicker
and transients, and harmonics.
- Applicable to five wiring systems:
single phase 2-wire x 4 single phase 3-wire, three phase
3-wire x 2 three phase 4-wire, and Scott wiring.
- Waveform and vector display.
- True RMS value can be displayed.
- Large color LCD screen.
- Recording interval can be set between 1 second and 1
hour.
- Internal non-volatile memory of 1MB.
- Storage data up to 1GB with compact flash card.
- Download data to PC through USB connection.
- Dual power supply: AC line voltage or battery
operation.
- Conforms to EN 61010-1 CAT III 600V safety standard.
|
|
|
Specifications |
|
Measurement |
Description |
| AC Voltage Range |
150.0V, 300.0V,
600.0V,1000V |
| AC Voltage Accuracy |
±0.2% of reading ±0.1% of full scale |
| AC Current Range |
500.0 Amps |
| AC Current Accuracy |
±0.2% of reading ±0.1% of full scale + clamp accuracy |
| Active Power Accuracy |
±0.5% of reading ±0.1% of full scale + clamp accuracy |
| Frequency Range |
40Hz to 70Hz |
| Effect of Power
Factor |
±1%
of reading, cos Ø = ±0.5
(Power Factor = 1) |
| Recording Intervals |
Seconds |
| |
Minutes |
|
| 1, 2, 5, 10, 15, 20, 30 |
| 1, 2, 5, 10, 15, 20, 30, 60 |
|
|
| |
| |
|
KEW8125 Clamp Sensor
Specifications |
|
AC Current Range |
500A |
|
Output Voltage |
AC 500mV/500A (AC 1mV/A) |
|
Accuracy |
±0.5% of reading ±0.1mV (50Hz to 60Hz) |
|
±1.0% of reading ±0.2mV (40Hz to 1kHz) |
|
Frequency Response |
40Hz to 1kHz |
|
Conductor Size |
40mm diameter maximum |
|
Dimensions (device only) |
128mm (L) x 81mm (W) x 36mm (D) |
|
Weight |
260g |
|
| |
| |
|
General Specifications |
|
Display |
3.5 inch color LCD (320 x 240 dot matrix) |
|
AC Power Supply |
100 to 240V AC (50/60Hz) |
|
DC Battery Power |
6 x LR6 batteries |
|
Dimensions |
206mm (H) x 184mm (W) x 65mm (D) |
|
Weight |
800g including batteries |
|
| |
| |
|
Ordering Information |
|
Model KEW6310-01 |
Power Quality Analyzer, 500 Amp |
|
| |
| |
|
Included Accessories |
|
 |
3 x Model KEW8125 clamp sensors.
1 x Test Lead Set (black, green, blue, red).
1 x USB Cable and PC Software.
6 x 'LR6' Batteries.
1 x Mains Power Cord.
1 x User's Manual.
1 x Carrying Case.
|
|
|
