Reed VC05 Loop Calibrator

Page Navigation >

Reed Test Instruments > Calibration Instrument Index > Model VC05

Reed Multimeter

Reed Calibrators

VC05 Loop Calibrator
	Features mA sourcing, simulation and measurement. 0 to 28 Volts DC measurement to check loop voltage. 0.02% accuracy and 0.001% of span display. Simulate mA and % of span display. Selectable step or ramp outputs. 24V loop power supply. Includes user manual, test leads, soft carrying case and batteries.

Specifications
Measurement Function	Range	Output Range	Resolution	Accuracy
Voltage	28V	-0.200 to 28.000V	1mV	±0.02% of Reading ±2mV
Current	20mA	-1.000 to 22.000mA	0.001mA	±0.02% of Reading ±4µA
Loop Current	20mA	1.000 to 22.000mA	0.001mA	±0.02% of Reading ±4µA

Specifications
Output Function	Range	Output Range	Resolution	Accuracy
Current	20mA	0.000 to 22.000mA	0.001mA	±0.05% of Reading ±4µA
Loop Power	24V	-	-	±10%

General Specifications
Power Supply	9 Volt alkaline battery
Battery Life	12 hours approximately
Dimensions	200mm (L) x 100mm (W) x 40mm (D)
Weight	550g

Ordering Information
Model VC05	Voltage/Current Calibrator

Home | Amprobe | CIE | EuroSMC | Fluke | Kyoritsu-Kew |Megger | Reed | Yokogawa | Site Map | Search

Leda Electronics Pty. Ltd.
A.C.N. 078 681 562           A.B.N. 83 078 681 562
P.O. Box 1733 Malaga, LPO WA 6944
                                                      Unit 5, 31 Century Road, Malaga, Western Australia 6090
Phone: 61 8 9248 6688    Fax: 61 8 9248 6227

information@ledaelectronics.com.au

Copyright © 2000 - 2011 Last Modified: Thursday, 15 September 2011