TPS CLAMP 50A/5A

Page Navigation >

Power Quality Accessories > TPS CLAMP 50A/5A

Fluke Accessories

TPS CLAMP 50A/5A Clip-on Current Transformer

Measuring Range	0.05A to 5Amp, 0.5A to 50Amp (selectable per software)
Peak Current	18A , 180Amp (for sinusoidal currents)
Intrinsic Error	0.5%
Frequency Range	40Hz to 10kHz
Operating Voltage	300V CAT IV
Phase Error	0.5*
Jaw Opening	< 15mm diameter or 15mm x 17mm bus bars

Errors in % of measuring range at 23°C ±2k; (74°F ±2k), FOR 48 TO 65hZ.

Phase angle error at nominal current.

Imax maximum current without time limit (for AC and DC shunts).

Leda Electronics Pty. Ltd.
A.C.N. 078 681 562           A.B.N. 83 078 681 562
                                                      14 Wright Street Kewdale, Western Australia 6105
Phone: 61 8 9472 4444          Fax: 61 8 9472 4644

information@ledaelectronics.com.au