Yokogawa AQ1300 Ethernet Hand-Held Tester

Overview
The AQ1300 is a compact and lightweight handheld tester optimized to the network path testing and maintenance of 10 Gigabit Ethernet networks. It combines functions and operations optimized to use in the field in one compact unit that is the smallest in its class.

The AQ1300 is a test solution to improve work efficiency and quality at the same time. The AQ1300 is equipped with test ports for 10 Megabit to 10 Gigabit Ethernet and optical power meter (factory installed option). It also supports throughput, latency time, BERT, loop back, and high-speed ping tests. It covers all the functions necessary for network path testing and maintenance in one unit. You just need to select a setup file and execute tests, and the auto-test mode automatically performs tests and saves the measurement results.

The in-band remote function allows you to search for opposite testers in a network domain, select one from a list display, and remote control it using a test line. The AQ1300 offers more powerful functions to help improve the skills of field operators.

AQ1300 MFT-10GBE 10 GIGABIT Ethernet Hand Held Tester

Features

5.7 inch High Definition Color LCD.
Screen structure allows easy to find important data and analysis details.
Optical and electrical test ports for 10 Megabits to 10 Gigabits.
Auto-Test with pre-defined test procedures.
In-band remote control simplifies far-end operations.
Optimized for network path test maintenance.
Easy to operate with a single hand, keys and knob set on the right side of instrument.
Optical Power Meter (optional).

AQ1300 Datasheet (PDF)
(documents are in PDF format and will open in a new window)

AQ1300 Front View above - AQ1300 Top View below

Model AQ1300 Top View

Specifications

Interface

Test Port	RJ-45	10BASE-T, 100BASE-TX,
		1000BASE-T
	SFT	1000BASE-SX, 1000BASE-LX
	XFP	10GBASE-SR, 10GBASE-LR,
		10GBASE-ER
Remote Port	LAN (RJ-45)	10BASE-T, 100BASE-TX,
	USB Type B (mini USB)	for PC control
Memory Port	USB Type A	for an external memory
Measurement Function
Measurement Menu	Auto, Auto (Remote), Manual, RFC2544, OPM (Optical power meter)
Measurement Mode	TRAFFIC, QoS, PING, Loop back, BERT
Transmission Function
Rate Setting	Unit of Setting	% (Resolution 0.00001%), bit (IFG),
		Frame/s
		Rate is changeable during transmission
Frame Length	48 to 9999 bytes
Transmission Data Setting	Payload setting, Variable frame field
Burst Setting	Number of Bursts	1 to 65535
	Burst Interval	1µs to 1 second
Transmission Time	Continuous, Number of frames, Time
QoS Transmission	Number of Channels	Up to 8ch (up to 4ch in Auto and Auto (remote) mode
Error Addition	FCS error, Symbol error, Undersize error, Oversize error
Transmission Frame Setting	VLAN tag (up to 4 stacks with the standard setup software, up to 2 stacks by the unit alone).
Receive Function
Receiving Performance	Receiving Frame Length	48 to 9999 bytes, (Minimum IFG: 5 bytes)
Latency and IFG Measurement	Resolution	100ns
BERT	Frame BERT (PRBS15)
Sequence Error Checking	Number of loss packet, Number of sequence error packet, Number of overlap packets, Maximum burst loss.
QoS Measurement	Up to 8 ch or Up to 7ch + other, up to 4ch in Auto and Auto (remote) mode, Latency of each channel, Payload error of each channel, Sequence error of each channel.
Loop Back Function
Target Frame	Addressing to an own port or all ports (excluding L2 broadcasting and Multicast frames, VLAN except for an own VLAN)
Field Swap	DA/SA of MAC address, DA/SA of IP address, Dst/Src port of TCP/UDP
Remote Control Function
In-Band Remote	Remote test synchronization, Remote test start synchronization, Opposite tester automatic search (), Opposite tester automatic addressing (). (*: applicable only within a segment)
Remote GUI	Communication Port	Remote port (RJ-45 or USB Type B) with the remote - GUI software
	Remote Desktop	(Windows) attached as an accessory
RFC2544 Function (optional)
Test Items	Throughput, Latency, Frame loss rate, Back-to-Back, Packet Jitter
Test Configuration	Two units of AQ1300 at both ends (AQ1300 in Loop Back mode at the far-end)
Test Conditions	Duration	1 to 999 seconds
	Number of Trials	1 to 60 times
Report Function	Format	csv, image (jpg and png), pdf
Layer-1 Measurement Function
Receiving Clock Measurement	Measurement Range	-100 to + 100ppm
	Resolution	0.1ppm
Optical Output Interruption	Optical output interruption and recovery
LFS Generation	Manual	Continuous transmission (Start/Stop)
	Auto	When a link down or LF is received, RF is transmitted automatically
Emulation Function
IPv4 Host	ARP reply, PING reply, MAC automatic acquisition, IP automatic acquisition (DHCP) (Up to 2 stacked VLAN).
IPv6 Host	NDP reply, PING reply, MAC automatic acquisition (NDP), Automatic address generation (up to 2 stacked VLAN).
PING (IPv4) Test	Test count, LOSS count/rate/cause, Min/Max/Avg response time, last 5 current values (Up to 2 stacked VLAN).
Traceroute (IPv4)	Route to destination, response time (Up to 2 stacked VLAN).
Log Function
Log Acquisition	Log Intervals	1 second
	Log Intervals	4, 12, 24, 48, 72 hours
	Log Intervals	Up to 4 log items
Optical Power Meter (Option)
Optical Connector	Universal connector (dia. 1.25)
Wavelength Range	850, 1300, 1310, 1490, 1550, 1625, 1650
Power Range	+ 10dBm to -60dBm
Measurement Accuracy	±5% (TA = 23°C ±5°C, condition: 1310nm, -20dBm, SM fiber)

General Specifications
Display	5.7 inch color LCD (640 x 480)
Interface	USB 1.1 Type A and Type B (mini), LAN (RJ-45) x 1
Operating Temperature	0°C to 45°C Humidity 20% to 85% RH non-condensation
Storage Temperature	-20°C to 60°C Humidity 85% RH non-condensation
Power Supply (AC adapter)	100 Volts to 240 Volts AC, 50/60Hz
Power Supply (Internal Battery)	Operating time: 1 hour (Battery Li-ion)
Dimensions	217.5mm (W) x 157mm (H) x 74mm (D) (excluding projections)
Weight	approx. 1.5kg (including battery pack)
Included Accessories	AC adapter, battery pack, hand belt, user's manual (CD-ROM), and operation guide