Voltage/Current Calibrator
Both signal source and measurement functions Simple
operation, easy to use,
Lightweight, compact body.
Source and Measuring of Voltage and Current:
General and measures voltages up to 30V DC and current up to 24 mA DC.
Improved display resolution for current:
The generation/measurement resolution has improved to
0.001mA.
Loop Check Function 24VDC (20mA).
4-20 mA and 1-5 VDC Step-up/down
Function:
The output level can be changed between 1,2,3,4,5V signals for the
1 to
5V DC output, for efficient calibration work.
20 mA SINK Function:
Absorb the voltage supplied from an external power supply to its
'H'
terminal and simulates a two-wire transmitter, idea for loop checks.
Sweep Function:
Increase and decrease the output level to the preset level at a constant
rate for the selected sweep time (16 or 32 seconds). The sweep function
and sweep time are set by the internal dip switch.
Ordering code (Model No.): CA11E-1 with Carrying Case
CA11E-2 with Rubber boot, Strap
and Accessory Case
Model CA11E Datasheet (PDF) (documents are in PDF format and will open in a new window)
