Yokogawa CL135 AC Current Clamp-On Tester

Clamp-On Meters > Model CL135

Yokogawa Clamp-On Meter for AC Current Measurements

Yokogawa Model CL135 Clamp Meter for AC Current Measurements

	True RMS Display.
	AC current measurement with current ranges up to 600A.
	AC voltage and resistance measurements.
	30mm in diameter of measurable conductor.
	Data hold function.
	Approved for conformity to safety standards EN61010-1, EN61010-2-031, EN61010-2-032 (CAT III 600V).

Parameter	Reference	Accuracy
AC Current	200A	1.5+4 (50 to 60Hz)
	200A	2.0+5 (40 to 1kHz)
	600A	1.5+4 (50 to 60Hz)
	600A	2.0+5 (40 to 1kHz)
AC voltage	200V/600V	1.0+2 (50 to 60Hz)
AC voltage	200V/600V	1.5+4 (40 to 1kHz)
Crest Factor		3 or less (50 to 60Hz)
Resistance	200Ω	1.2+4 Beeps at below 30Ω (continuity check)

At 23°C ±5°C, 75% RH or less
Accuracy: ±(% rdg + dgt) = ±(% readout + value of least significant digit)

Parameter	Specification
Method of detection	True RMS
Display	LCD (Digital Display: 1999 counts)
Response Time	Approx. 1 second (Approx 2 seconds on Resistance range)
Range Switching	Manual-range
Data Hold	On all ranges
Peak Hold	N/A
Ambient Temperature	-10°C to 50°C
Relative Humidity (no condensation)	up to 30°C RH 90%
	up to 40°C RH 75%
	up to 50°C RH 45%
Temperature Coefficient	N/A
Influence of External Magnetic Field	2A or less at 400A/m
Influence of Conductor Position	±3% or less
Safety Standard	EN61010-1, EN61010-2-031, EN61010-2-032
Circuit Voltage	600Vrms or less
Withstanding Voltage	5.55kV AC for one minute
Power Supply	6F22 (006P)9V x 1 or 6LR61 x 2
Battery Life	Approx. 200 hours (continuous)
Consumed Current	Approx 2mA
Auto Power Off	Approx. 10 minutes
Diameter of Measurable Conductor	30mm at maximum
Dimensions	93mm (W) x 210mm (H) x 40mm (D)
Weight	Approx. 400g
Accessories	User's manual (IM CL130), batteries, Carrying case (93032)