Yokogawa CL250 AC/DC Current Clamp-On Tester

Portable and Hand-Held Instruments > Model CL250

Portable and Hand-Held Instruments Including: ● Calibrators ● DMMs ● Clamp-On Testers ● Portable Data Loggers ● Insulation Testers ● Thermometers ● Portable Analog Meters ● Light Meters, and ● Precision Measuring Equipment.

Model CL250
Clamp-On Tester for AC/DC Current Measurements

Yokogawa Model CL250 Clamp Meter for AC/DC Current Measurements

	AC/DC current measurements with current ranges up to 2000A.
	AC/DC voltage and resistance measurements.
	Mean Value display
	55mm in diameter of measurable conductor.
	DC output.
	Sleep Function
	Data Hold Function
	Approved for conformity to safety standards EN61010-1, EN61010-2-031, EN61010-2-032 (CAT III 600V, CAT II 1000V).

Parameter	Reference	Accuracy
DC Current	400/2000A	1.5+2
AC Current	400A/2000A (0 to 1000A)	1.5+2 (50 to 60Hz)
AC Current	400A/2000A (0 to 1000A)	3.0+4 (40 to 500Hz)
	400A/2000A (0 to 1000A)	5.0+4 (500 to 1kHz)
	2000A (1001 to 1000A)	3.0+2 (50 to 60Hz)
DC Voltage	400/1000V	1.0+2
AC Voltage	400/750V	1.5+2 (50 to 60Hz)
AC Voltage	400/750V	1.5+4 (40 to 1kHz)
Resistance	400Ω/4000Ω	1.5+2 Beeps at below 50Ω ±35Ω (continuity check)
Output	DC 400A (0 to 400mV)	±1.5% rdg ±3mV
	DC 2000A (0 to 200mV)	±1.5% rdg ±3mV
	AC 400A (0 to 400mV)	±1.5% rdg ±3mV (50 to 60Hz)
	AC 2000A (0 to 100mV/ 0 to1000A)	±3.0% rdg ±3mV (40 to 500Hz)
	AC 2000A (0 to 100mV/ 0 to1000A)	±5.0% rdg ±3mV (500 to 1kHz)
	AC 2000A (100.1mV to 200mV/ 1001A to 2000A)	±3.0% rdg ±3mV (50 to 60Hz)

At 23°C ±5°C, 75% RH or less
Accuracy: ±(% rdg + dgt) = ±(% readout + value of least significant digit)

Parameter	Specification
Method of detection	Mean Value
Display	LCD (Digital Display: 3999 counts)
Response Time	Approx 2 seconds
Range Switching	Manual on current and voltage range. Auto range on Resistance ranges.
Data Hold	On all ranges
Max Hold	On Current and Voltage ranges
Ambient Temperature	0°C to 40°C
Relative Humidity	up to 40°C RH 85% (no condensation)
Influence of External Magnetic Field	4A or less at 400A/m
Influence of Conductor Position	±(1.5% rdg + 3dgt) or less
Safety Standard	EN61010-1, EN61010-2-031, EN61010-2-032
Circuit Voltage	1000Vrms or less
Withstanding Voltage	5.55kV AC for one minute
Power Supply	R6P(SUM-3) x 2 or LR6 x 2
Battery Life	Approx. 100 hours (continuous)
Consumed Current	Approx 9mA
Sleep Function	Approx. 10 minutes after last switch operation.
Diameter of Measurable Conductor	55mm at maximum
Dimensions	105mm (W) x 250mm (H) x 49mm (D)
Weight	Approx. 530g
Accessories	User's manual (IM CL250), Test Lead (98012), Output Plug (98012), batteries, Carrying case (93034)

Model CL250 Clamp-On Tester for AC/DC Current Measurements

Model CL250
Clamp-On Tester for AC/DC Current Measurements