Yokogawa CL320 AC Leakage Current Clamp-On Tester

Clamp-On Meters > Model CL320

Yokogawa Clamp-On Meter for AC Leakage Current Measurements

Yokogawa CL320 Clamp Meter for AC Leakage Current Measurements

	Mean value display.
	Leakage current measurement with current range from 20mA to 200A.
	24mm in diameter of measurable conductor.
	Light weight and compact design.
	Auto power off.
	Manual range switching.
	Approved for conformity to safety standards EN61010-1, EN61010-2-032 (CAT III 300V).

At 23°C ±5°C, 75% RH or less
Accuracy: ±(% rdg + dgt) = ±(% readout + value of least significant digit)

Parameter	Specification
Method of detection	Mean Value
Display	LCD (Digital display:1999 counts)
Response Time	Approx. 2 seconds
Range Switching	Manual range
Data Hold	On all ranges
Peak Hold	N/A
Ambient Temperature and Humidity	0 to 40°C 85% RH or less (no condensation)
Temperature Coefficient	N/A
Influence of External Magnetic Field	10mA or less in proximity to a 14.4mm-dia conductor carrying 100Amps.
Influence of Conductor Position	Within 5dgt for 0 to 50A, or 2% for 50A to 200A (10mm-dia conductor at inside the jaw)
Influence of residual current	10mA or less in proximity to a 10mm-dia conductor carrying 50Amps.
Safety Standard	EN61010-1, EN61010-2-032 (CAT III 300V)
Circuit Voltage	300Vrms or less
Withstanding Voltage	3.7kV AC for one minute
Power Supply	LR-44 x 2 (3V) or SR-44 x 2
Battery Life	Approx. 15 hours (continuous)
Consumed Current	Approx. 5mA
Auto Power Off	Approx. 10 minutes
Diameter of Measurable Conductor	24mm maximum
Dimensions	Approx. 60mm (W) x 149mm (H) x 26mm (D)
Weight	Approx. 120g
Accessories	User's manual (IM CL320), Batteries & Carrying Case (93033)