| |
Input Channels |
2 |
 |
Input Couplings |
TC (thermocouple),
DC, GND |
|
Input Type |
Isolated unbalanced |
|
Applicable TC Sensors |
K, E, J, T, L, U, N,
R, S, B, W, iron-doped gold/chromel |
|
Data Updating Rate |
500Hz |
|
Frequency Range(-3db)1 |
DC up to 100Hz |
| |
Voltage
Accuracy1 (at voltage mode) |
±(0.08% of 10 div +
2μV) |
| |
Temperature
Measurement Accuracy
1, 12
|
| |
|
Type |
Measurement Range |
Accuracy |
|
K |
-200°C TO
1300°C |
±(0.1% of
reading + 1.5°C)
except -200° to 0°C
±(0.2% of reading + 1.5°C)
|
|
E |
-200°C TO
800°C |
|
J |
-200°C TO
1100°C |
|
T |
-200°C TO
400°C |
|
L |
-200°C TO
900°C |
|
U |
-200°C TO
400°C |
|
N |
0°C TO
1300°C |
|
R, S |
0°C TO
1700°C |
±(0.1% of
reading + 3°C) |
|
|
|
except 0 to
200°C: ± 8°C |
|
|
|
200° to 800°C: ± 5°C |
|
B |
0°C TO 1800°C |
±(0.1% of
reading + 2°C) |
| |
|
except 400to
700°C: ± 8°C |
| |
|
effective
range: 400 to 1800°C |
|
W |
0°C TO 2300°C |
±(0.1% of
reading + 3°C) |
|
Iron-doped
gold/chromel
|
0 to 300K
|
0 to 50K: ± 4K |
|
50 to 300K: ±
2.5K |
|
| |
|
|
| |
|
| |
Maximum Input
Voltage (1kHz or less) |
42 V (DC + AC peak)
(CAT I and CAT II, 30 Vrms) |
| |
Input Range (for
10 div display) |
100μV/div to 10V/div
(in steps of 1, 2 or 5) |
| |
Input Connector |
Binding post |
| |
Input Impedance |
Approx. 1 MΩ |
| |
Input Filter |
OFF, 2 Hz, 8 Hz, 30
Hz |
| |
Temperature
Coefficient (for Voltage)
|
Zero point: ±(0.01% of 10
div)/°C + 0.05 μV)/°C (typical value) |
| |
Gain: ±(0.02% of 10
div)/°C (typical value) |
| |
|
|
Strain Module (NDIS) Cat # 701270
|
| |
Input Channels |
2 |
 |
Input Types
|
DC bridge input
(automatic balancing), balanced differential input,
DC amplifier (floating). |
|
Automatic
Balancing Method |
Electronic
auto-balance
|
|
Automatic
Balancing Range |
± 10,000 μSTR (1
gauge method) |
|
Bridge Voltages |
Select from 2V, 5V
or 10V |
| |
Gauge Resistances |
120Ω to 1000Ω
(bridge voltage of 2V) |
| |
|
350Ω to 1000Ω
(bridge voltage of 2V, 5V, 10V) |
| |
Gauge Rate |
1.90 to 2.20
(variable in steps of 0.01) |
| |
A/D Conversion |
16 bits (4800
LSB/div: Upper = + FS, Lower = -FS |
| |
Maximum Sampling
Rate |
100 kS/s |
| |
Frequency Range
(-3db) |
DC up to 20kHz |
| |
DC Accuracy1 |
± (0.5% of FS + 5
μSTR) |
| |
Measurement
range (FS)/Measurement range(-FS to +FS)
|
| |
|
Measurement range
(FS) |
Measurement range (-
FS to + FS) |
|
500 μSTR |
- 500 μSTR to
500 μSTR |
|
1000 μSTR |
- 1000 μSTR to
1000 μSTR |
|
2000 μSTR |
- 2000 μSTR to
2000 μSTR |
|
5000 μSTR |
- 5000 μSTR to
5000 μSTR |
|
10,000 μSTR |
- 10,000 μSTR
to 10,000 μSTR |
|
20,000 μSTR |
- 20,000 μSTR
to 20,000 μSTR |
| |
|
|
| |
mV/V Range
Support |
mV/V range = 0.5 x
(μSTR range/1000) |
| |
Maximum Allowable
Input Voltage (1kHz or less) |
10V (DC + AC peak) |
| |
Maximum Allowable
In-phase Voltage |
42V (DC + AC peak)
(CAT I and CAT II, 30V rms)
|
| |
Temperature
Coefficient |
Zero
point: ± 5 μSTR/°C (typical
value) |
| |
|
Gain: ± (0.02% of FS)/°C
(typical value) |
| |
Internal Filter |
OFF, 1 kHz, 100 Hz,
10 Hz |
| |
Input Connector |
NDIS standard |
| |
Accessory
|
2 x NDIS connectors
(A1002JC) |
| |
Recommended
Bridge Head (NDIS type) (sold separately) |
# 701955 (bridge
resistance of 120Ω) (with 5meter cable) |
| |
# 701956 (bridge
resistance of 350Ω) (with 5meter cable) |
