|
Input
|
Type |
Plug-in modules (each unit has
a built-in A/D converter) |
|
Slots |
8 |
|
Horizontal Input
|
Max record length
|
2.5 MW/CH, 50MW total
(standard)
10MW/CH, 250 MW total (with
/M1 option)
25MW/CH, 500 MW total (with
/M2 option)
50MW/CH, 1GW total (with /M3
option) |
|
Time axis accuracy
|
±0.005% (operating conditions:
Ambient temperature of
23°C, ambient humidity (RH)
of 55 ±10% |
|
Sweep time |
500ns to 5 sec/div (in steps
of 1, 2, or 5), 10 sec/div,
20 sec/div, 30 sec/div
3, 4, 6, 8, 10, 20, 30 sec/div
1 to 10 min/div (1 min steps),
12 min/div, 15 min/div,
30 min/div.
1 to 10 hour/div (1 hour
steps), 12 hours/div
1 day/div, 2 days/div, 3
days/div |
|
Acquisition
|
Mode Normal |
Maximum sampling rate 10 MS/s |
|
Mode Envelope
|
Holds peak value at maximum
sampling rate, regardless of time/div
setting. |
|
Box average |
Increases A/D resolution up to
4 bits (up to 16 bits) |
|
Averaging |
Number of averages: 2 to
65,536 (2n steps) |
|
Roll |
100msec/div or less |
|
Triggers
|
Mode |
AUTO, AUTO LEVEL, NORMAL,
SINGLE, SINGLE (N), LOG |
|
Pre-trigger |
0 to 100% (in 0.1% steps) |
|
Simple trigger source |
CH1 TO CH16, DSP1 TO DSP6,
LINE, EXT, LOGIC_A, LOGIC_B, TIME |
|
Slope selection
|
CH1 to CH16, DSP1 to DSP6:
Rise, fall, rise-fall
EXT (external trigger input),
LOGIC_A
LOGIC_B: Rise, fall
Time: Date (year/month/date),
hour (hours/ minutes),
time interval (1 minute to 24
hours) |
|
Enhanced trigger source |
CH1 to CH16, LOGIC_A, LOGIC_B |
|
Enhanced trigger type
|
A→B(N), A delay B,B> Time, B<
Time, B Time Out, Period, Window, OR, Edge On A,
Wave Window |
|
Screen |
Updating rate |
Maximum 30 screens/sec for a
single waveform. |
|
Display
|
Display |
10.4 inch color TFT liquid
crystal display |
|
Effective screen size |
211.2mm x 158.4mm |
|
Resolution |
800 x 600 |
|
Waveform display pixels
|
650 x 512 (in normal waveform
mode)
750 x 512 (in wide waveform
display mode) |
|
Display
modes
|
Split |
Single, dual, triad, quad,
octal |
|
Zoom
|
Main, Main & Z1, Main & Z1 &
Z2, Main & Z2, Z1 only, Z2 only, Z1 & Z2 (Z1
& Z2 are abbreviations for zoom area 1 and zoom area 2, respectively) |
|
X-Y
|
Single mode (X is fixed, Y is set by user),
Quad Mode (XY1, XY2, XY3, XY4) |
|
Accumulation |
PERSIST Overlays in one color. |
|
