|
Screen Data Output
(Printer)
|
Destinations
|
Select built-in
printer, external USB printer, or network printer (with /C10 option). |
|
Normal
Format |
Outputs hard copy of
screen shot. |
|
Long Format
|
Zooms displayed
waveform along time axis and outputs (The zoom factor differs depending on
the time/div). |
|
Screen Data Output (Image
Saving)
|
Destinations
|
Installed drive
(Floppy drive, ZIP® drive, or PC card), external SCSI drive,
internal hard drive (with/C8 option), network drive (with /C10
option) |
|
Formats |
PNG, JPEG, BMP,
PostScript. |
|
External I/O (Logic input specifications)
|
Input Points |
8 bits x 2 |
|
Maximum sampling rate |
10MS/s |
|
Compatible probes
|
8-bit non-isolated
(#700986), 8-bit isolated (#700987) |
|
External I/O
(Ext Trig In/Ext Trig OUT)
|
Connector |
RCA pin jack. |
|
Input/Output level |
TTL (0 to 5V) |
|
Input Level |
TTL (0 to 5V) |
|
Input Frequency
|
Up to 1 MHz (for
module 701250 / 701251 / 701255),
Up to 100 KHz (for
module 701260 / 701270 / 701271,
DSP-CH), Up to 500
Hz (for module 701265). |
|
Communication Interfaces
|
GP-IB, USB
peripheral equipment jacks (USB keyboards
and USB printers),
USB (complies with Rev. 1.1, for connection to PC), Ethernet (complies
with 100BASE-TX and 10BASE-T, with /C10 option), serial (RS232), and SCSI. |
|
GO/NO-GO I/O
|
Connector Type |
Modular jack (RJ12) |
|
I/O Level |
TTL (0 to 5V) |
|
Probe Power Terminal (with
/P4 option) Max No. of probes powered |
4
|
|
Compatible probes
|
Current probes
#700937 (15Amp peak)
and #701930 (150 Amps Rms) |
|
Note:
Maximum number of current probes that can be used at any one time is 4 for module
#700937 and 2 for module #701930 |
|
Voice Memo Function
|
Record (roll mode) Flexible |
Multiple recording
(minimum 3 seconds up to 100 seconds, total
100 seconds). |
|
Record (roll mode) Fixed
|
Select from 5
seconds x 20, 10 seconds x 10, 20 seconds x 5, 25
seconds x 4, 50 seconds x 2, 100 seconds x 1 |
|
Save |
Save together with
waveform data (binary, same file). |
|
Playback
|
Voice data loaded on
the main unit is outputted from microphone terminal
and speaker output terminal
(GO/NO-GO). |
|
Voice Comment Record |
3 to 100 seconds |
|
Voice Comment
Save |
When image saving is
executed (separate file) |
|
Voice Comment
Playback
|
Playback from
microphone terminal and speaker output
terminal (GO/NO-GO).
|
|
Acquisition Memory Backup
|
Batteries
|
Four AA alkaline dry
cells (AAR6) (JIS and IEC type name LR6) or four
nickel metal-hydride rechargeable batteries. |
|
Backed Up Data |
Acquisition memory,
waveform data, voice data. |
|
Backup Duration |
Approx. 10 hours
(with /M3 option) (actual backup duration will vary
according to the usage conditions). |
|
Media Drives
|
Internal Media Drives
|
Floppy drive, Zip®
drive, or PC card (choose one), and 20GB hard drive
(with /C8 option). |
|
General Specifications
|
Rated Supply Voltage
|
100 to 120V AC, 200
to 240V AC (automatically
switched). |
|
Rated Supply Frequency |
50 / 60 Hz |
|
Power Consumption |
Approx. 200 VA
maximum |
|
Maximum Voltage
|
1500V AC for one
minute across power supply & ground. |
|
Insulation Resistance
|
10MΩ or greater at
500V DC across power supply & ground. |
|
Exterior Dimensions |
355mm (W) x 250mm
(H) x 180mm (D). |
|
Weight
|
Approx. 6.6kg (main
unit with full options, including
M3, C8, C10 and P4) |
|
Operating Temperature |
Range 5°C to 40°C |
