Maximum No. of Calculation Channels

Model MV1004

12 channels

Model MV1006

24 channels

Model MV1008

12 channels

Model MV1012

24 channels

Model MV1024

24 channels

Model MV2008

12 channels

Model MV2010

60 channels

Model MV2020

60 channels

Model MV2030

60 channels

Model MV2040

60 channels

Model MV2048

60 channels

Maximum Equation Length

120 characters

Calculation Types

General Calculations

Basic arithmetic, square root, absolute value,

common logarithm, natural logarithm, exponent,

power, relational operations (<, ≤, >, ≥, =, ≠),

logical operations (AND, OR, NOT, XOR)

Statistical Calculations

TLOG (maximum value, minimum value, and P-P

value for time series data)

Special Calculations

PRE, HOLD(a):b, RESET(a):b, CARRY(a):b

Conditional Statement

[a?b:c]

Max. Settable Constant

60 (K01 to K60)

Report Function

Report Types

Hourly, daily, hourly + daily, daily + weekly,

daily + monthly

Calculation Types

Reports can be calculated using a combination of up to four of the following:

Average, maximum value, minimum value,

integrated value, and instantaneous value.

Cu10/Cu25 RTD input/3-wire Isolated RTD Input
               Option (/N1)

Enables the use of Cu10 and Cu25 inputs in addition to the standard inputs.
 

3-wire Isolated RTD Input
             Option (/N2)
 

All RTD terminals (A, B, and b) are isolated.
Note: Only available with Models MV1006, MV1012, MV2010, MV2030, MV2040 and MV2048.

External Input
                Option (/N3)

Enables the use of the following thermocouples and RTD's in addition to the standard inputs.

Thermocouples (TC)

Kp vs Au7Fe, PLATINEL, PR40-20, NiNiMo, W/Wre26, TypeN(AWG14).

RTD's

Pt25, Pt50, Ni100(SAMA), Ni100(DIN), Ni120, J263*B, Cu53, Cu100.

Remote Control
               Option (/R1)

The MV models can be controlled through contact input (up to eight (8)  inputs can be set).

24V DC Transmitter Power
Supply
               Options (/TPS2*),
                              (/TPS4*)

Output Voltage

22.8 to 25.2V DC (for rated current load)

Rated Output Current

4 to 20mA DC

Max. Output Current

25mA DC (over-current protection level: approximately 68mA DC).

*/TPS2

is only available for MV1000 Series

*/TPS4

is only available for MV2000 Series

Pulse Input
               Option (/PM1)

Contact and open-collector pulse input is possible through the use of special remote input terminals. The calculation (/M1) and remote control (/R1) options are included in with the pulse input option.

Number of Inputs

3 channels (however, if the remote control input terminals are used for pulse input, then up to 8 channels can be made available).

Input Methods

Photocoupler isolation (no isolation between channels). Internal isolated power supply (approx. 5V).

Input Types

Dry contact, open collector (TTL or transistor)

Input Value Correction
             Option (/CC1)

Ten-segment linearizer approximation can be used on every measurement channel to correct input values.

Settable Points

2 to 16 (settable broken-line points)