|
Scale Length |
Approximately 107mm; afterglow-illuminated scale
plate. |
|
AC Voltage Measurement
|
If any AC voltage is present across the test
terminals, the tester lets you know by pointing to an AC voltage
value and turning on the LED lamp. You can perform AC voltage
measurement with the MEAN switch turned off.
|
|
Additional Functions
|
Automatic Discharge Function: If the object under
test remains electrified after the MEAS switch is turned off, the
tester lets you know by turning on the LED lamp. If you leave the
tester connected to the electrified object, the tester automatically
begins to discharge electricity and then the LED goes out. |
|
When the object under test is capacitive and electrified, the tester
lets you know by turning on the LED lamp. When left connected to the
object, the tester automatically discharges electricity, thus
preventing possible electric shock or spike noise at power-on. |
|
Battery Check |
BAT mark on the scale plate. |
|
Battery Life
|
Approximately 10 hours when continuously operated on
manganese-oxide batteries with the pointer pointing to the central
scale value. |
|
Batteries |
Four AA (R6P) batteries. |
|
Dimensions |
125mm (W) x 103mm (H) x 53mm (D) excluding
protrusions. |
|
Weight |
Approximately 500g (main unit and batteries only,
excluding accessories). |
|
Compliance
|
EN61010-1-1993; EN61010-2-31: 1995
(over voltage Category III, Pollution Degree 2 installations for
indoor use). |
