|
|
|
|
| |
|
Time
axis: |
200, 500
us/div |
| |
1, 2, 5, 10,
20, 50, 100, 200, 500 ms/div |
| |
1, 2, 5, 10,
30 s/div |
| |
1, 2 min/div |
|
Time axis
resolution: |
80
points/div (measurement period is 1/80 of time axis) |
|
Memory
recording length: |
10, 20, 50,
100, 200, 400, 800, 1600, 3200*¹, 6400*² div |
| |
*¹ Only
works on odd-numbered channel when two channels are connected together.
*²
Only
works on channel 1 when four channels are connected together. |
|
Number of
memory div. blocks: |
32
maximum--varies depending on installed memory length, set memory length
and whether or not wave window trigger is used. |
|
Auto
functions: |
Automatic
printing, automatic statistical calculations, automatic saving (to
external memory), automatic dialing (for faxing). |
|
Cursor
functions: |
One
cursor: Measurements on all channels displayed simultaneously. Two
cursor: Time on all channels, as well as measurement differences or
frequencies. |
|
Cursor
calculation function: |
max/min/avg/rms
for cursor range, surface area of cursor range. |
|
| |
| |
|
|
| |
|
Recording
paper: |
Thermal
paper roll (111mm (width) x 10 meters), effective recording width:
104mm. |
|
Paper
feed accuracy: |
± 3% |
|
Chart
speeds: |
2, 5, 10, 30
s/div; 1, 2, 5, 10, 30 min/div; 1 hour/div. |
|
| |
| |
|
|
| |
|
T-Y
Recording: |
4 analog
channels + 8 logic bits; 1, 2, and 4 division recording capability
(logic recording can be turned on.off separately for each bit). |
|
Digital
recording: |
Measurements
are recorded as digital values. |
|
X-Y
Recording: |
X1-Y1,
Y2-Y3, X axis is always 1 channel only.
Recording size :8div x 8div (80mm x 80mm).
Recording format options: Dots, Lines. |
|
Recording
length: |
20 div, 200
div, 800 div continuous. |
|
Recording
line types: |
Three line
thicknesses (analog waveforms). |
|
| |
| |
|
|
| |
|
Printing
information: |
List
(settings), scale (units), time print marker, chart speed, chart speed
modification point marker, trigger sensing position, trigger time,
trigger sensing channel, grid (thin line, baseline, off), Channel
number, TAG, etc. |
|
Comments: |
Character
string (20 characters per channel) or channel information printed in
100mm intervals. |
|
Channel
number: |
Channel
number or TAG name (7characters per channel) printed on waveform. |
|
| |
| |
|
|
| |
|
Description
of operations: |
Normally
memory sampling starts when trigger is detected during real-time
recording. |
|
| |
| |
|
|
| |
|
Trigger
sources: |
Analog
channels 1-4, logic A and B, external trigger input, manual, timer. |
|
Trigger
modes: |
Free,
Single, Repeat. |
|
Trigger
Combinations: (conditions) |
AND/OR |
|
Analog
Trigger types: |
Rise, fall,
high, low, bi-slope, level window (in, out). |
|
Trigger
level setting: |
1% FS
increments. |
|
Trigger
filter: |
Filter or
time-out (except when bi-slope is set). |
|
Trigger
Delay: |
-100% to
100% (in increments of 1%). |
|
| |
| |
|
|
| |
|
Trigger
modes: |
Single
, repeat, free. |
|
Frequencies: |
50
Hz, 60Hz. |
|
Trigger
combinations: (conditions) |
OR
on each analog channel. |
|
Method
of creating reference waveform: |
Automatically
generated from current input or specified parameters. |
|
Reference
waveform parameters: |
Amplitude,
tolerance, offset (1% increments for each), phase (in increments of 1%). |
|
Trigger
delay: |
-100%
to 100% (in increments of 10%). |
|
Sampling
rates: |
80
kS/s (1 ms/div), 40 kS/s (2 ms/div), 16 kS/s (5 ms/div), 8 kS/s (10
ms/div). |
|
Memory
length: |
Memory
cannot be linked; maximum memory length for each channel is one-half
that of normal triggers.
Maximum memory length: 800 div. |
|
|
