• High Precision.
• Basic accuracy 0.020%.
• True RMS measurement.
• Simultaneous measurement and display of DC and AC.
• Full support for Data Management.
• Large-capacity logging-mode memory (1000 data points).
• USB communication, applicable software
  (Optional DMM communication package).
• Safety shutters for preventing erroneous insertion of test leads into current measurement terminals.
• Closed Case Calibration.
• 3-year Warranty.

Standard Accessories (included)

• Four type 'AA' (R6) dry cells, test lead set #98015, 440mA/1000V and 10A/1000V fuses (installed), and instruction manual.

Measurement

Range

Accuracy

DC Volts

50.000mV to 1000.0V

0.02% + 5 digits

AC Volts (RMS)

50.000mV to 1000.0V

0.7% + 30 digits

DCV + ACV

5.000V to 1000V

1.0% + 10 digits

DC Current

500.00µA to 10.000A

0.2% + 2 digits

AC Current (RMS)

500.00µA to 10.000A

1.0% + 10 digits

DCA + ACA

500.00µA to 10.000A

1.5% + 10 digits

Continuity Check

buzzer sounds at 100Ω ±50Ω or less  Range: 500.0Ω

Resistance

500.00Ω to 50.000 MΩ

0.1% + 2 digit

Diode Test

2.4000V

1.0% + 2 digits

Temperature ^Note1

-200°C to 1372°C

1.0% + 1.5°C

Capacitance

5.000nF to 5000mF

1.0% + 5 digits

Frequency

2.000 Hz to 99.99 kHz

0.02% + 1 digit

Duty Cycle

10% to 90%

±1%

Measurement Functions:

DC voltage, AC voltage, DCV + ACV, DC current, AC current, DCA +ACA, resistance, frequency, temperature, capacitance, continuity check, diode test, duty cycle, decibel calculation, and Low-pass filter.

Additional Functions:

Range hold, maximum/minimum/average values, resistance and capacitance zero, relative and percentage value calculation, manual mode memory, logging-mode memory, auto power off and backlight (white LED).

Display:

5-digit LCD: 7-segment
Digital display: Main display 50,000 counts, Sub display: (50,000 counts)
Bar graph display: 51 segment
Polarity indicator: "-" appears automatically when the polarity is negative
Overrange indicator: "OL" appears

Measuring Rate:

Instrument: 6 times/sec
Frequency: 1 time/sec
Capacitance: max. 0.03 times/sec (50mF)
Resistance: 4 times/sec
Bar graph display: 15 times/sec

Operating Temperature:

-20°C to 55°C; 80% RH or less (no condensation)
 40°C to 55°C; 70% RH or less

Storage Temperature:

-40°C to 70°C; 70% RH or less (no condensation)

Temperature coefficient:

Add the accuracy 0.05/°C to the basic accuracy at a temperature within
-20°C to 18°C and 28°C to 55°C

Power Supply:

Four type "AA" (R6) dry cells

Battery Life:

Approx. 120 hours (for continuous DC voltage measurement with Alkaline cells)

Withstanding Voltage:

6.88kV for 5 seconds (between input terminals and casing)

Compliance/Standards:

Safety EN61010-1, EN61010-031, 1000V CAT III, 600V CAT IV,
pollution level 2, 2000m max. above sea level
EMC: EN61326-1 Class B, EN55011 Class B Group 1

Dimensions:

Approx. 90mm (W) x 192mm (H) x 49mm (D)

Weight:

Approx. 560g (including batteries)