Wide viewing angle 3.5" TFT-LCD with both Digital graph and Bar graph Displays.
	Auto-set and Auto-run function with use of external memory.
	Measure current and electrical power with additional Clamp-on Accessories.
	Thermocouple measurements.
	RTD 3-wire measurements.
	Alarm outputs.
	Trigger function.
	Automatic battery change when power failure occurs.
	Computing function.

Datum-Y Datasheet (PDF)
(documents are in PDF format and will open in a new window)

Parameter

Specification

Terminal Shape

Push-lock screw (model XL121, XL122), M3 screw (XL124)
RTD for model XL121 and XL122 only.

Number of Inputs

8 channels (XL121), 16 channels (XL122, XL124)

Measurement Interval

100ms  to 1 hour (8 channel terminal block is used)

200ms to 1 hour (16 channel terminal block is used)

Storage

Internal memory (16MB)

External Storage
 

Compact Flash memory card (Type II), SD card USB memory (only the copy function is supported by USB memory)

Input (range)
 

DCV (100mV - 50V, 1 - 5V f.s.), Thermocouples K, E, J, T, L, U, N, W, R, S, B,
RTD's Pt100, JPt100, Digital (Pulse, Logic) (RTD's for models XL121 & XL122 only)

Functions

 

Alarm output (4ch), Trigger function (pre trigger/trigger delay), calculation (four arithmetic operations between 2 channels, linear scaling, Statistical operation), Average function, Automatic Measurement function.

Communication Function

LAN, USB, RS-232, RS-485

Parameter

Specification

Operating Temperature

0C to 50C,  RH 5 to 85% (non-condensing)

Storage Temperature

-20C to 60C,  RH 90% or less

Size

Approx 155mm (W) x 155mm (H) x 55mm (D) (without projecting parts/rubber boot)

Weight

Approx 800g (without battery and rubber boots)