|
Overview
YPC4000 is a combination
Calibrator / HART
communicator that reduces
the time spent on field
calibrations and the number
of test instruments that
have to be carried into the
field. The YPC4000 Series
delivers the versatility of
a modular calibrator and the
convenience of HART
communications in one
handheld unit.
Users
can view up to four
measurements simultaneously
on the high resolution LCD
or compare HART PV and AO
values to corresponding
values measured. Available
sensor modules include a
variety of differential,
vacuum, and absolute
pressure as well as voltage,
current and temperature.
A
voltage and current meter is
integral to the base unit.
All HART field devices can
be configured, polled, and
trimmed using HART
communications. Device
Specific commands for more
than 200 supported devices,
including EJA/EJX pressure
transmitters, YTA
Temperature Transmitters,
and Yewflo are available.
|
|
|
YPC4000 Datasheet
(PDF)
(documents
are in PDF format and will
open in a new window)
|
Features and
Benefits
-
Intrinsic Safety - Class
1, Div 1 areas per CSA
22.2 and UL 913 by MET
Laboratories.
-
User Interface - 2.6" x
2.6" display, four soft
keys (definitions change
with mode requirements)
and eight hard keys
provide user interface.
Display is configurable
for 1 to 4 simultaneous
measurements.
-
Modules - select from a
variety of positive lock
measurement modules for
excellent versatility.
-
Field Recertification -
sensor modules and
integral V/I can be
recalibrated for zero,
span, and linearity
through the base unit.
-
Measurement Units -
customary English and
Metric System units are
selectable.
-
User Convenience - Auto
shut-off, Damping,
Min/Max value capture,
display Hold, Sensor
Zero, direct Contrast
adjustment and tare.
-
Security Lockout - The
YPC4000 settings can be
locked out entirely or
by a specific feature.
-
Diagnostics - The
YPC4000 self-tests upon
power up and upon
installation of sensor
modules. Advisories are
posted on the display.
-
Field Updates - uses
Internet downloads to
update and add
capability/HART®
support.
-
Dedicated DOF Memory -
Memory for 500 HART®
profiles.
|
-
Documenting -
Documenting memory and
firmware for use with
DMS software. Stores up
to 200 HART
configuration files and
over 100 calibration
results. Communicate
with PC via DB-9
connector.
-
Optional DMS Software -
The Device Management
System software is a
full feature software
tool for calibration and
configuration management
of smart and
conventional field
devices. DMS provides
user-friendly navigation
and organization of
field devices,
scheduling of
calibration procedures,
and storage of smart
field device
configuration data.
The calibration
management features are
extended to the
Calibration /
Configuration equipment
as well. Calibration and
configuration change
reporting, certificates,
and device history are
standard features in
DMS.
|
|
|
General
Specifications |
|
Display |
128 x 128 pixel
graphic display,
2.6" x 2.6"
viewable area,
5-digit
resolution |
|
Operating
Temperature |
-5°C
to 50°C |
|
Storage
Temperature |
-40°C
to 60°C |
|
Power Supply |
Six (6) type
"AA" alkaline or
NiMH batteries.
(optional
100-240V AC
50/60Hz power
adapter) |
|
Connections |
Pressure: 1/8"
FNPT, 316ss
Electrical: Std
banana jacks
(3/4" center)
for
±50mA/Volts,
HART and Loop
leads, Data
transfer: DB-9
for RS-232C. |
|
NIST Traceable
Accuracy |
Pressure:
±0.025% to
±0.10% of full
scale including
all effects of
linearity,
repeatability,
hysteresis and
temperature over
the ranges of
23°F to 122°F.
Current/Voltage:
±0.025% of full
scale ±0.001% of
Span per °F
(ref. temp 70°F) |
|
Pressure Module
Limits/MEDIAS |
GI/AI modules: 2
x range/316ss
compatible DN
modules: 2 x
range when
pressurized on
high side only,
150 PSI when
applied
simultaneously
to high and low
sides / dry
gases only. |
|
Dimensions (Base
Unit) |
approx. 9" (L) x
4.7" (W) x 3.58"
(D) (with shock
absorbing boot) |
|
Weight |
approx. 28 ozs |
|
Dimensions
(Modules) |
2.3" (L) x 1.3"
(W) x 2.6" (D) |
|
Weight |
approx. 8.3 ozs
or less |
|
|
|
|
